Coal Washer

Home > Non-metallic Ore Crusher > Coal Washer

Coal washer is an important washing machine in coal washing process. We know, when the raw coals are mined from underground, they need to pass some coal working procedure so that coal can be used in our modern life.

Coal Washer

Coal washing is an essential pre-process of coal cooking. Coal can divide into raw coal and clean coal. Raw coal is generally used as fuel for energy, clean coal or fine coal is used for coal cooking.

Clean coal should be washed with water to sulfur, to impurities and other industrial processes, in order to achieve the criteria used coke. So, coal

Coal washer and sand washer

Sand washer also called sand washing machine is applied widely in sandstone factory, construction site, hydroelectric station dam, glass manufacturing, and oil well development. Sand washer equipped with sand making machine is the necessary sand washing product. It can wash stone powder and residual away from the mixed sands produced by sand making machine, which can improve the sand quality mostly.

Installation and debugging of sand washer

1. Motor should outfit rain shelter to protect equipment from creep age.
2. Sand washer should be installed on the back of vibrating screen. The rotary direction must strictly according to the requirement.
3. Check every connective bolt has been fastened before trial run.
4. Check every movable part has been lubricated well before trial run.
5. Drive belt pulley run by man before trial run. Make sure there are not any blocks in the process of working, and then user can carry on blank test. During two hours there are not any striking, pulley swinging and bearing loosen occur and the bearing temperature rise cannot exceed 35 centigrade. If the above trouble occurs, please stop machine immediately and check it.
6. The machine should be installed on the reinforced concrete. Beside this, machine user need to build a concrete sedimentation basin to deal with the waste water. The waste water can be reused after precipitation. These techniques not only meet the environmental requirement but also reduce the sand’s cost.
7. Because this machine’s working place and conductor materials are contacted with water, so users must guarantee the lead is insulated.