Precautions during the use of cone crusher
Cone crusher is suitable for crushing raw materials in metallurgy, construction, road construction, chemical and silicate industries, and can crush various ores and rocks with medium or above medium hardness. The cone crusher has a large crushing ratio, high efficiency, low energy consumption, uniform particle size, and is suitable for medium and fine crushing of various ores and rocks.
(1) The ore feeding must be uniform, and the product particle size meets the requirements
(2) Pay attention to the operation of ore discharge and transport belt at any time to avoid blockage accidents
(3) Check the oil pump, cooler, filter and oil temperature frequently, and the return oil temperature should not exceed 60°C
(4) Check the drainage of the water seal and dustproof, if there is no water, it is not allowed to run
(5) Pay attention to check the oil pressure of the locking cylinder, the adjustment ring must be able to operate under the locked state
(6) Regularly check the wear of the liner, pay special attention to the liner fixing bolts on the adjustment ring, if loose, it will cause the liner to loosen. After the newly replaced liner has been working for 24 hours, it should be stopped and tightened once
NEXT: Crushing process and equipment in the beneficiation process