Notes on six prohibited operations in the use of crushers
1. It is forbidden to operate without reading the instructions
After purchasing the equipment, you should carefully read the relevant instruction materials of the crusher, be familiar with the use and maintenance of the crusher, and do not operate it yourself if you are not skilled, so as to avoid unnecessary accidents. It is best to have professionals present.
2. It is forbidden to operate something inside the machine
Before the crusher starts working, check whether there are ores or missing pieces in the crushing cavity. The crusher is not allowed to start with load, which will cause electrical tripping or damage to machine parts, so check the crushing cavity before driving, if there are ores or iron blocks, they must be removed before starting.
3. It is forbidden to use unqualified power supply
Use an unqualified power supply, do not put more electrodes that have not been baked, pay attention to the quality of the electrodes when lowering the electrodes and within a few minutes after lowering the electrodes, try to move the electrodes as little as possible or do not move the motor, and take various measures to prevent soft breakage of the electrodes. Once a soft break occurs, it must be dealt with immediately.
4. It is forbidden to work without wearing personal protective equipment
There will be noise and pollution when crushing things, which will cause great harm to our bodies for a long time, so we should pay attention to wearing personal protective equipment before operation to reduce the damage of the crusher to us.
5. It is forbidden to use only without maintenance
Maintenance is very important for crushers. Long-term use will bring unnecessary wear and tear to the machine, so check the wear degree of the machine regularly, do maintenance regularly, and lubricate the machine regularly, so that your machine can play a greater role .
6. Do not turn off the power when the power is off
When the power is suddenly cut off during use, remember to turn off the power, as a sudden call will cause unnecessary damage. After the work is over, you should also tidy up your things, turn off the power and leave, and develop a good habit of working.
NEXT: Sand and gravel equipment The difference between vertical sand making machine and cone crusher