The unreasonable structure of the crusher causes the hammer head of the crusher to be wear-resistant!

Generally speaking, the hammer head of the crusher is different, and the crushing capacity is different. Of course, it may also be related to the unreasonable structure of the crusher.

The crushing and screening host adopts high wear-resistant materials, which can improve the service life of wear parts. Reasonable structural design can effectively ensure the safety and stability of the vehicle body. The maintenance rate is greatly reduced. Appropriately reduce labor costs. The stone material falls directly into the high-speed rotating turntable from the upper part of the machine, and the rotor rotates at high speed under the rotation of the motor. It collided with the crushing plate to be broken, and was thrown to the counterattack device to be broken again. This process is repeated until the stone is crushed to the required particle size and discharged from the discharge port. The structure of the broken plate is hollow, which is prone to cracking, depression and other phenomena. This is because the hollow structure of the crushing plate makes the working surface relatively weak. At the same time, larger pieces of material easily enter the working area of ​​the grate plate, which indirectly accelerates the wear of the hammer head and causes the hammer head to appear non-abrasive. Phenomenon. It is also one of the reasons why the hammer head of the crusher is not wear-resistant.