In the sand and gravel production line, the use of the crusher makes it easier to make sand for some large materials, and the use of the sand making machine plays a role in the final shaping of the crushed materials. After analyzing the production of the sand making machine, it is found that some conditions must be met for the high-performance production of the sand making machine.

So, what are the conditions and factors required for the efficient production of sand making machines?

1. In the setting of the feeding device of the sand making machine, a relatively uniform process specification must be adopted. So that the particle size difference in the feeding is reduced to the minimum. Under such conditions, once the sand making machine runs at a very high speed, and with the increase of inertial force, its smoothness will be very high.

2. During the selection process of the crushing chamber of the sand making machine, we found that the crushing chamber that is not long and narrow so that the materials can stagnate in it for a long time can promote the effective sand making operation of the sand making machine. This requires us to compare the timing of the most time-consuming steps in the entire process. Generally, in the case of medium and low production rates, we choose a 2-3 cavity design, while in the case of high production rates, we choose a continuous cavity design. The streamlined design of even 1 cavity.

3. In the cavity design of the sand making machine, the simplified structure of one cavity requires us to control the particle size just right. Not all particle size control theories can be applied to the design of the working chamber of this type of sand making machine. After comparing the excellent manufacturing processes, we found that the crusher with U-shaped cavity is the most suitable for this production need.

4. The new high-performance sand making machine production line needs to control the particle shape. We use an incentive-type computer control system for particle shape control. The advantage of this method is that it is very autonomous and automatic. After the particle shape does not meet the requirements, it is impossible to produce a fine crushing cavity. When there are some cavity mechanism adjustment operations, due to the use of fully automatic sensor laying, the labor cost is saved to the greatest extent.

5. The sorting and screening of the sand making machine can be laid at the discharge of the sand making machine to reduce unnecessary loss.