spodumene lepidolite has been processed can involve several different steps, including screening, flotation, and drying. The price of a spodumene lepidolite crushing plant with a capacity at 300-500 tph can vary depending on the specifications of the machine. A more expensive plant will likely have features like high efficiency and low emissions.

The Spodumene Lepidolite Crushing Process Flowchart:

1. The crusher is loaded with spodumene lepidolite and it starts the crushing process.
2. The crushed spodumene lepidolite is then fed into the primary crusher where the size of the pieces is reduced.
3. The secondary crusher breaks down larger pieces into smaller pieces and it helps to remove any impurities from the crushed spodumene lepidolite.
4. The powdery residue is then discharged through a slag discharge system or a dust collector where it can be disposed of properly.

Capacity and Specifications of the Spodumene Lepidolite Crusher

The capacity of the spodumene lepidolite crusher is typically in the range of 100-150tph. The specifications can vary depending on the model, but most typically have a diameter of 300-600 mm and a length of 1500-2000 mm. They are usually equipped with a jaw impact crusher and a cone crusher.